Esco | Containment Barrier Isolator

Containment Barrier Isolator

Esco Containment Barrier Isolator (CBI) facilitates the isolation of a product or process while providing the required conditions for a sterile/aseptic environment. It is configured to operate at positive or negative pressure. This equipment provides a comprehensive range of personnel and product protection in addition to protection for the surrounding work areas and the environment.

CBI's design has complete compliance to PIC/s and EU cGMP standards with its 19 mm radius coved internal corners in a single piece chamber (no perforations or grilles for contaminants to be trapped on all 4 corners). Its Rear Return Filter ensures that ducts are not contaminated. The system comes in either recirculatory or single pass airflow.

Applications

Pharmacy Compounding (Chemotherapy/TPN)
As a Class III Cabinet for Biosafety Levels (BSL) 3 and 4
Small Batch Sterility Testing
Small-scale Potent Material Handling
Cell Processing
Aseptic Processing
Research and Development

Request a Quote

Warranty Registration

View Other Containment Isolators

General Processing Platform Isolator (GPPI)

Controls exposure/cross-contamination risk to hazardous/aseptic materials for a wide variety of equipment and processes
Controls false-positive risk for sterility testing
Provides Operator Exposure Levels (OEL’s) ≤1.0 μg/m³ during controlled operations
Levels of ≤0.1 μg/m³ can be achieved via closed-transfer processes or based on client SOPs
Enhances cGMP practices
Quiet, energy-efficient ECM fans auto adjust to compensate for filter blockage
Standard dimensions available are easily customized to suit process requirements
Safe glove change and low contamination filter change
FDA-approved static seals
Class 2 containment enclosure on manual pressure leak test and Class 3 containment enclosure on automated pressure test as per ISO 10648-2
System comes with a Semi-automated or Automated Pressure Hold Testing
Pass Chamber comes in 2 sizes:
- Small, non-gloved
- Large, non-gloved/gloved

Guide to Models
CBI-__-__ - __
Isolator	Code	Airflow Regime	Code	Internal Width	No. of Glove Ports	Pass-through Chamber	Code	Electrical Code
Containment Barrier Isolator	CBI	Unidirectional	U	1200 mm	2G	1 Pass-through chamber	1PTC	220-240 V, AC, 50 Hz, 1Ø
		Turbulent	T	1600 mm	3G	2 Pass-through chamber	2PTC	110-120 V, AC, 50 Hz, 1Ø
				2000 mm	4G

Pass chamber with glove ports
BioVap™ bio-decontamination system
Non-viable air sampler
Viable air sampler
Sterility test pump
Analytical balance
Weighing scale granite slab
Glove leak tester
Automated Pressure Hold Test (Client-supplied compressed air)
Automated Pressure Hold Test (On-board compressor)
Continuous Liner System
Bag Welder with Table
RTPØ105, 190, 270, 350, 460 – Alpha
RTPØ105, 190, 270, 350, 460 – Beta Canister
RTPØ105, 190, 270, 350, 460 – Beta Liner
Sharps disposal
Spray gun with manual ball valve
Temperature and humidity sensor
H₂O₂ monitoring
Liquid waste entry/exit ports
Ø250 mm product waste bag out ports
UV lamp
Carbon filter
Adjustable hydraulic stand
CCTV Camera
Rear view screen adaptation
Electrical outlet
Hard-ducting with anti-blowback valve
4” butterfly valve
Fan filter box (H14 BIBO filter + Fan)

Brochure, English

Compounding Pharmacy Equipment

Esco Pharmaceutical Products

Sellsheet

2019-2020 Product Guide

Esco Product Line Card

FEATURES

Controls exposure/cross-contamination risk to hazardous/aseptic materials for a wide variety of equipment and processes
Controls false-positive risk for sterility testing
Provides Operator Exposure Levels (OEL’s) ≤1.0 μg/m³ during controlled operations
Levels of ≤0.1 μg/m³ can be achieved via closed-transfer processes or based on client SOPs
Enhances cGMP practices
Quiet, energy-efficient ECM fans auto adjust to compensate for filter blockage
Standard dimensions available are easily customized to suit process requirements
Safe glove change and low contamination filter change
FDA-approved static seals
Class 2 containment enclosure on manual pressure leak test and Class 3 containment enclosure on automated pressure test as per ISO 10648-2
System comes with a Semi-automated or Automated Pressure Hold Testing
Pass Chamber comes in 2 sizes:
- Small, non-gloved
- Large, non-gloved/gloved

MODELS

Guide to Models
CBI-__-__ - __
Isolator	Code	Airflow Regime	Code	Internal Width	No. of Glove Ports	Pass-through Chamber	Code	Electrical Code
Containment Barrier Isolator	CBI	Unidirectional	U	1200 mm	2G	1 Pass-through chamber	1PTC	220-240 V, AC, 50 Hz, 1Ø
		Turbulent	T	1600 mm	3G	2 Pass-through chamber	2PTC	110-120 V, AC, 50 Hz, 1Ø
				2000 mm	4G