Esco | Healthcare Platform Isolator (With Filter Below Work Zone)

Isoclean® Healthcare Platform Isolator (With Filter Below Work Zone)

Optimized Solution for Sterile/Aseptic Applications

The Isoclean® Healthcare Platform Isolator (HPI-G3) facilitates the isolation of a product or process while providing the required sterile/aseptic environment. It is configured to operate at positive or negative pressure in single or recirculating airflow. This equipment provides a comprehensive range of personnel and product protection in addition to the surrounding work areas and the environment.

The positive pressure HPI-G3 model is suitable for work involving non-hazardous materials, while the negative pressure isolator is suitable for work involving hazardous materials e.g. cytotoxic compounding applications.

The work zone and pass chamber interchange are either under positive or negative pressure to the room to maintain sterility or operator protection, respectively, in case of a breach in the barrier isolation system.

Key Benefits

Designed in accordance with international cGMP standards
Class 2 containment enclosure as per ISO 10648-2 standards
Suitable for various applications such as pharmacy compounding, as Class III cabinet for Biosafety Levels (BSL) 3 and 4, small-scale potent material handling, aseptic processing, research and development, and cell processing

Request a Quote

Warranty Registration

View Other Compounding Pharmacy Equipment

Inbuilt dampers (option for manual or automated) to allow pressure testing without having to use cover plates, tape & silicone
Centrifugal, direct-drive blowers designed for maximum energy efficiency and minimal maintenance
Sentinel™ Gold Microprocessor Control System supervises all functions and monitors airflow and pressures in real-time.
Type D Pass Chamber with interlocked doors, adjustable purged duration, and time-delayed ingress/egress control allowing sufficient time for surface decontamination to minimize transfer of contamination.
Removable sliding tray (option for perforated or non-perforated) prevents operator fatigue during transfer procedures
Electromagnetic Interlocking Doors with time delay effect ensures safety and containment between the Pass Chamber and the Process Chamber.
Return Filter (option to upgrade to safe change BIBO) below work zone filters the contaminated air immediately to minimize possibility of airborne contamination
Foot switch provides hands-free access to opening and closing of the magnetic interlock minimizing operator fatigue during transfer procedures
HEPA H14 filters with a typical efficiency of >99.995% at 0.3 microns provide superior ISO Class 5 air cleanliness, 100 times better than competing products.
Fluorescent lamps (optional LED) deliver >800 Lux to the work surface for superior overall illumination.
With ISO Class 5 environment, the Process Chamber facilitates aseptic processing in an EU GMP Grade A condition
Circular glove ports with minimal crevices, no exposed bolts and nuts
Frameless front visor panel with highly rounded edges to minimize crevices and maximize door vision panel
Single or multiple, removable work trays for easy surface cleaning and decontamination.
Optional adjustable hydraulic stand, with casters, elevates to accommodate user preference for sitting or standing work surface height

Guide to Models

HPI-__ __ - __ __ __ - __

Isolator

Code

Process Chamber Internal Width

No. of Gloves

Electrical Code

Code

Pressure

Code

Airflow

Code

Pass-through Chamber

Code

Sharps Container

Code

Isoclean® Healthcare Platform Isolator

HPI

1215 mm

220-240 V, AC, 50/60 Hz, 1Ø

Positive

Single Pass

None

1520 mm

110-120 V, AC, 50/60 Hz, 1Ø

Negative

Recirculating

Left or Right

L or R

Yes

1825 mm

Both Sides

Electrical outlets
UV Lamp
IV bars with hooks for handling bags
Exhaust collar*
Carbon VOC with filter housing
Hard Ducting with Anti-blow back valve
CCTV and rear view adaptation
Hydraulic Stand Control
Glove Leak Tester
BioVap™ bio-decontamination system
Single- or Multi-piece tray option
Sharps container
Continuous Liners for Bag In or Bag Out (BIBO)
Bag Welder for Continuous Liner System

*for negative isolator only

Compounding Pharmacy Equipment
pdf

Isoclean® Healthcare Platform Isolator
pdf

2017-2018 Product Guide

FEATURES

Inbuilt dampers (option for manual or automated) to allow pressure testing without having to use cover plates, tape & silicone
Centrifugal, direct-drive blowers designed for maximum energy efficiency and minimal maintenance
Sentinel™ Gold Microprocessor Control System supervises all functions and monitors airflow and pressures in real-time.
Type D Pass Chamber with interlocked doors, adjustable purged duration, and time-delayed ingress/egress control allowing sufficient time for surface decontamination to minimize transfer of contamination.
Removable sliding tray (option for perforated or non-perforated) prevents operator fatigue during transfer procedures
Electromagnetic Interlocking Doors with time delay effect ensures safety and containment between the Pass Chamber and the Process Chamber.
Return Filter (option to upgrade to safe change BIBO) below work zone filters the contaminated air immediately to minimize possibility of airborne contamination
Foot switch provides hands-free access to opening and closing of the magnetic interlock minimizing operator fatigue during transfer procedures
HEPA H14 filters with a typical efficiency of >99.995% at 0.3 microns provide superior ISO Class 5 air cleanliness, 100 times better than competing products.
Fluorescent lamps (optional LED) deliver >800 Lux to the work surface for superior overall illumination.
With ISO Class 5 environment, the Process Chamber facilitates aseptic processing in an EU GMP Grade A condition
Circular glove ports with minimal crevices, no exposed bolts and nuts
Frameless front visor panel with highly rounded edges to minimize crevices and maximize door vision panel
Single or multiple, removable work trays for easy surface cleaning and decontamination.
Optional adjustable hydraulic stand, with casters, elevates to accommodate user preference for sitting or standing work surface height