Esco PROtect Wireless Monitoring System

 Esco PROtect Wireless Monitoring System
  • Real Time Monitoring System
    • Wireless Technology that protects your samples 24/7 with continuous data logging function and immediate alarm notifications
    • Centralize monitoring for all your equipment (any brands and any models):
      • -Temperature for refrigerators, freezers, cold chambers, cryogenic tanks and -80 freezers.
      • -Temperature and CO2 for ovens/incubators.
      • -Temperature and humidity for climatic chamber, ambient area
    • Measurement and recording of physical parameters such as temperature, CO2, and humidity.
    • Direct reading on the display.
    • Compared to Wi-Fi, radio frequency has longer battery life and longer transmission distance.
    • Using radio frequency, repeaters can be installed to extend the distance which cannot be easily done by some Wi-Fi system.
  • Alarm Capabilities –Securing Your Samples
    • Avoid loss of products.
    • Real time alarm management
    • Visual and audible alert
    • Remote alarm notification via E-mail.
  • Simple and Cost Effectiveness
    • Fast Installation, commissioning and maintenance.
    • Can centrally monitor integrity of samples even during a power outage or electronic failure of refrigerator, freezer, incubator, oven, etc.
    • Accurate and efficient compared to manual data readings.
    • Reduce labor cost for manual data readings. Manual data readings are less accurate, less reliable and time consuming. Saves you time and money.
    • Readily accessible thru the display or monitoriing software thru PC.
    • Multi-site installation. Multiple buildings can be monitored accros town, another country.
    • Interchangeable digital probes with embedded memory to facilitate maintenance procedures.
    • Modern and eco-friendly.
  • Traceability and Security - Quality Assurance
    • Comply with quality assurance procedures: ISO 17025 and ISO 15189 norms, Good laboratory practices and local regulations recommend the use of tools to guarantee the reliability of your temperature controlled equipment (ultra-low temperature freezers, lab freezers, lab refrigerators, lab ovens, lab incubators, refrigerated incubators, CO2 incubators, etc).
    • Audit trail traceability for conformance to 21 CFR part 11
    • Local regulations or recommendations within Quality Management Programs
  • Software System and PC Interface •Remote visualization of data.
    • Downloaded database is presented in easy to understand reports or graphs.
    • PROtect software enables to visualize recorders located on the installation map and to manage your alarm.
Modems, Relays and Alarm System
Item CodesDescriptionFeatures/Specification
1081050ESCO PROtect UN-1
-868 Mhz band
  • Single Channel RF Transmitter;-200 to +400°C;
    4-20mA;0.1V;Dry Contact
1081052ESCO PROtect UN-2
-868 Mhz band
  • Dual Channel RF Transmitter;-200 to +400°C;
    4-20mA;0.1V;Dry Contact
1081054ESCO PROtect DG-1
-868 Mhz band
  • Single Channel RF Transmitter;-40°C
    to 80°C/ tH : -30°C to 70°C from
    0 to 100% RH non-condensing
1081058ESCO PROtect MD-1
-868 Mhz band
  • Connects to your PC, it enables communication with Esco PROtect UN/DG
  • Communicates with an unlimited number of recorders.
  • Remote alarm driven by integrated dry contact output
    (vocal telephonic transmitter, buzzer, light).
  • Software, PC or power supply failure alarm.
  • Can be used with or without Esco PROtect Relay.
1081060ESCO PROtect EMD-1
-868 Mhz band
  • Enables Ethernet connection to maximize distances
    between recorders and PC servers
1081062ESCO PROtect RL-1
-868 Mhz band
  • Enables direct RF communication to maximize distances between recorders and PC servers.
  • Works with external power supply and supplied with a rechargeable battery.
  • Includes two power ranges: 25 mW to communicate with recorders and
    500 mW to communicate with Modem.
1081064ESCO PROtect AM-1
-868 Mhz band
  • Provides real time warning if a problem occurs
  • Integrated sound and visual alarm.
  • Works with an external power supply and supplied with a
    backup battery.
  • Push button for local alarm acknowledgement.
  • Relay output to trigger remote alarm
    (vocal telephonic transmitter …)
  • Warns Esco PROtect software when the battery is low.
Options and Accessories Product
Item CodesDescriptionFeatures/Specifications
1081070PROtect Software and Dongle
  • Remote visualization of data.
  • Downloaded database is presented in easy to understand
    reports or graphs.
  • PROtect software enables to visualize recorders located on the installation map and to manage your alarm.
  • Compliant with FDA (CFR 21 part 11)
  • Note: PROtect software and dongle needs to be installed even if one (1) PROtect recorder (UN or DG) is connected to the equipment.
1081071Audible and Visual Alarm Device
  • Warns if a problem occurs.
  • Works with an external power supply.
  • Connects directly to PROtect Modem or to PROtect Alarm.
  • Audible and visual Alarm.
1081072PT100 Probe
  • Type of Probe: Pt 100 Class B
  • Measurement range: -200°C to + 260°C
  • Type of cable: 3 wires (3m)
1081073Digital Temperature Probe
  • Type of probe: Dallas
  • Measurement range: -40°C to + 80°C (-45°C max)
  • Type of cable: flat 3m cable
  • Embedded memory for gauging parameters storage
1081075Battery for Recorders
  • Lithium Battery
1081076ESCO PROtect CO2 probe
  • Measurement range: 0 - 20%
  • Output: 4-20 mA
  • Mounting: Wall mounting bracket supplied
  • Supply: 230VAC
1081078Power supply for USB Modem, Ethernet Modem and Alarm System
  • Power Supply for MD-1, EMD-1, AM-1

1081079Power Supply for Relay
  • Power Supply for RL-1
1081080Universal Adaptor Cable for CO2 and DP sensors
  • (5m) with connector IP67 for PROtect UN and DG.
1081081Digital Temperature/Humidity Probe
  • Measurement range: -40 +80°C /0 100%HR
  • Type of probe for T°: Pt 1000
  • class A
  • Accuracy: ±2%HR from 0 to 90%HR
    ±3%HR from 90 to 100%HR
  • Power: delivered by the SPYRF recorder
 
PROtect Server:

Computer Architecture: 32 bit and 64 bit
OS: Windows 2000, XP, Vista, Win 7 and Windows 2003-2008 Server
RAM: 3 GB (minimum)
HD: 250 GB capacity or higher
Video Card: VGA compatible 1280 X 1024 32 bit (minimum)

PROtect Client:

Computer Architecture: 32 bit and 64 bit
OS: Windows 2000, XP, Vista, Win 7 and Windows 2003-2008 Server
RAM: 2 GB (minimum)
HD: 1 GB capacity or higher
Video Card: VGA compatible 1280 X 1024 32 bit (minimum)